Things To Keep In Mind While Sharpening Chainshaw- Do’s And Don’ts

If you have your chainsaw and you have a new chainsaw sharpener to go with it, you might be wondering what is the most effective way to sharpen your chainsaw. Fortunately, it is not as hard as you might think. It might be a little harder than simply sharpening the chainsaw and you are ready to start cutting down everything in your way.

However, we have done the legwork and after sharpening a couple of chainsaws and having a few injuries, there are a few things that you can keep in mind. These tips could help you to get the sharpest possible blade, but it can also ensure that you avoid any potential injuries when you are sharpening the blade.

Things To Keep In Mind While Sharpening Chainshaw- DO's And Don'ts

The Do’s And Don’ts Of Sharpening Your Chainsaw:

If you are used to watching many tutorials, they generally tell you how to sharpen your chainsaw, but not all of them actually tells you what you need to avoid when sharpening it. Now, you can use this guide to find out what works and what you might need to avoid when you are sharpening the chainsaw effectively:

  • DO Familiarize Yourself With The Sawchain:

If you don’t understand the basics of the saw chain, you won’t be able to sharpen it effectively. It is important to study the saw chain from the manual. You will notice the smaller cutters that we don’t always give too much attention to and these can actually help to ensure your blades are sharp everywhere.

The raker or the depth gauge can be overlooked by many people and you need to give it a lot of attention. It will indicate how much bite your cutter takes out of the wood when it is used. This can help you avoid potential injury. Especially when you have trees that might amble over once they have been cut.

  • DON’T Wait for Wood Dust:

Ask any old chainsaw user and they will tell you to wait for the wood dust to be more than the wood chips before you sharpen the chainsaw. However, this is not always needed and once the chainsaw starts producing dust, the chances are that you are already busy damaging your blade. It is better to develop a routine of sharpening the blade after every couple of uses.

  • DO Use A Vice:

If you want to get the best possible results, it is better to use some sort of vice for stabilization. The vice will comfortably grab the blade and keep it sturdy. This sturdiness will ensure that you can give ample attention to each blade and you won’t need to worry about it wobbling around.

  • DON’T Forget Your Sharpener:

We know that it can happen by accident, but many people leave their file or chainsaw sharpeners behind when they are traveling with the chainsaw. However, this can be frustrating when you need to sharpen the blades or cutters on the go. You might be cutting down so many trees that you find your cutter producing wood dust before your job is even over.

If you commonly use an electric chainsaw sharpener, it is best to have a backup in the form of a file or other manual chainsaw sharpener. However, this might not be needed if you are planning to work at home or in the garden. Check out the full comparison between Manual V/s Electric Chainsaw Sharpener.

  • DO Wear Protective Gloves:

As you start filing or sharpening the blades, you might find that they can be sharp enough to actually hurt you. It is much better to be protected and wear some sort of glove or protection on your hands. You probably also need gloves when using the chainsaw and these gloves can actually work well when you are sharpening it.

  • DON’T Pull The File:

You might be tempted when filing to push it in one direction and pull it back in the other. However, this might not give you an even sharpening experience. It is much better to continuously push the file forward. This will give you more control over the file and you will be able to sharpen each part of the blade evenly. This can be important for every aspect of the filing process.

  • DO Use A Sharpening Guide:

A sharpening guide is sure to show you a few of the most important aspects when it comes to filing your chainsaw. It is much better to use some of the tips and tricks that have been mentioned in this guide. They should help you to achieve the best possible level of sharpness in virtually no time at all. This reduces the possibility of doing it over.

One additional thing to remember is that the chainsaw guides for different sharpeners might vary and you need to have the right sharpener guide. The electric sharpener technique differs significantly, but once you have mastered it, the process of sharpening your blade with a grinder-like tool is much more effective to do.

  • DON’T Forget Your Depth Gauges:

As we have already mentioned, the depth gauges are what people generally miss when they are sharpening the blade. However, a dull depth gauge can work against you and you only be relying on the cutters to do the job. The depth gauge allows you to control how much wood is chipped out with each usage of the chainsaw. If too much is cut out, you might run the risk of the tree or any other object falling on top of you.

Wrap-Up:

When it comes to using high-powered tools like the chainsaw, safety is one of the most important things to keep in mind. These DO’S and DON’TS will surely help you to get the best possible results and still remain safe when you are sharpening and using your chainsaw. They are also easy to remember and makes a lot of sense.

Let us know if we missed any other important aspects that people should keep in mind when sharpening a chainsaw. We would love to read some of your comments.

Leave a Comment